Anchor
...
...
If you haven’t If you haven't yet prepared the server yet, please follow refer to the below document prior to this guide: https://gytpol.com/docs-sysreq document provided here: System Requirements.
Download the server and client Sensor files sent to you by the GYTPOL team and place it them on the GYTPOL server you've created.
Open the Local Group Policy Editor on the server
(by navigating to gpedit.msc
) >:
Go to Computer Configuration > Windows Settings > Security Settings > Local Policies > User Rights Assignment.
...
Ensure that the GYTPOL app user is part of the "Log on as a batch job" and "Log on as a service" privileges. If the GYTPOL app user is not included in these privileges, please add
...
the user to
...
both.
...
For customers that have the “Remote Employees” feature and cloud access, please check if the following URL is accessible and you get “passed” status:
https://gytpol-cloud-api.azurewebsites.net/api/v1.0/health_check
...
Note: in case of failed status, please make sure the needed URL are allowed as requested in the prerequisites document and you are not using any proxy.
Open CMD > ping _gytpol and see the result. It should reply with GYTPOL servers FQDN. Make sure it is correct.
...
Please install the client on the server prior to the server installation.
Extract the GYTPOL client zip and run the MSI installation from an elevated CMD (as Administrator) - once finished, the progress window will be disappeared.
...
GYTPOL Server Installation:
Right Click on the server installation .exe file > Run as Administrator
...
Once you read the EULA and ready to proceed, check “I agree…” and click Install
...
For POCs and deployments Launch the Command Prompt (CMD) and enter the following command:
ping _gytpol
Review the results; it should reply with the Fully Qualified Domain Name (FQDN) of the GYTPOL servers. Ensure that the FQDN provided is accurate. If there are any discrepancies or issues, please investigate and rectify as needed to ensure the correct functioning of GYTPOL servers.
...
Before proceeding with the server installation, it's essential to install the GYTPOL Sensor on the server. Follow the steps below:
Extract the GYTPOL Sensor zip file to a location on the server.
Open an elevated Command Prompt (CMD) by running it as an Administrator.
Navigate to the location where you extracted the GYTPOL Sensor files using the 'cd' command. For example:
cd path\to\extracted\GYTPOL-SensorRun the installation by executing the Sensor MSI file.
Allow the installation process to complete. Once finished, the progress window will disappear.
...
GYTPOL Server Installation:
Locate the GYTPOL server installation .exe file on your server.
Right-click on the server installation .exe file.
From the context menu, select "Run as Administrator."
...
After reviewing the End User License Agreement (EULA) and when you are ready to proceed with the installation, follow these steps:
Read the End User License Agreement (EULA) thoroughly.
Once you have reviewed the agreement and agree to its terms, check the box that says "I agree to the terms…"
After checking the box, proceed by clicking on the "Install" button.
...
For Proof of Concepts (POCs) and deployments with up to 3000 endpoints (servers and computers) > select Typical and ContinueOnce , follow these steps:
During the installation process, when prompted to select the installation type, choose "Typical."
After selecting "Typical," proceed by clicking on the "Continue" button.
When prompted for GYTPOL user credentials , please type <YOURDOMAIN\GYTPOLUSER> in Username and Password fields on the screen > Continue
...
Once finished, please click Closeduring the installation process, follow these steps:
In the "Username" field, type:
<YOURDOMAIN\GYTPOLUSER>(Replace<YOURDOMAIN>with the actual domain).In the "Password" field, enter the corresponding password for the GYTPOL user.
After entering the credentials, proceed by clicking on the "Continue" button.
...
After completing the GYTPOL Server installation, simply click "Close" to exit the installation wizard.
...
In the next upcoming steps, we will 'll verify that the installation was completed successful without encountering any issues or errors.
Please open Open Task Scheduler and make sure you can see the gytpolServer tasks (confirm the presence of the following tasks: GytpolServer, GytpolServerDaily, GytpolServerWeekly) and . Ensure that at least one of them these tasks is currently running.
...
Navigate to c:\gytpol\data\GPMCProxy\config\dcs.json and make sure verify that the Domain Controllers you see listed in the file are located on situated in the Main Site of your Active Directory and are in belong to the same domain as your GYTPOL server.
Note: We
...
recommend opening the JSON files using Notepad++
...
for better readability and ease of editing.
...
In the provided example,
...
there are only
...
two Domain Controllers
...
located in the Main Site, and
...
both
...
are displayed in the
...
JSON file.
...
Note:
...
If there are any modifications to the JSON file, such as adding or removing Domain Controllers, ensure that the file maintains the Comma Delimiter format,
...
similar to the example provided.
After making any
...
changes,
...
open System Services and restart
...
the following GYTPOL services: GPMCPROXY service,
...
GYTPOL Data Repository service, and GYTPOL Validator service.
Please open System Services and validate Verify that all GYTPOL services are up active and running and . Ensure that the GPMC PROXY service is running with using the GYTPOL user credentials ( for Group Policy Modeling).
...
Please open Access Default Apps on the server and set designate Google Chrome (preferably version 88 100 and above are supported, but though the latest version is preferredrecommended) of or the new Edge as your the default web browser.
...
Double-click the gytpol Validator link on your desktop to access the dashboardOnce opened, your . Upon opening, you will be prompted for the License.
Click on "Generate ID" and fill complete the form with your details:
...
When you click Generate, .
Ensure that all required information is accurately filled out to facilitate the license generation process.
...
After clicking "Generate," a key file will be automatically downloaded.
...
Please email it send the downloaded key file to license@gytpol.com and once . Once processed, the GYTPOL license team will send you a new key file will be sent to you. Save the this file on the GYTPOL server.
Open Next, open the gytpol Validator UI from the desktop link on the desktop and click on "Upload License". Navigate to the key file you received from the GYTPOL license team and upload it to the server.
That’s it – Congratulations! You are now ready to go! proceed. We can now move on to the client Sensor installation and deployment.
...